Application:
The LN-10 cap lamp is an intrinsically safe lamp that can be used in underground mines where
there is a possibility of methane explosions.The cap lamp is designed for maintenance free charging,
operation is easy and gives excellent illumination in differen work situations.
 
Design:
The LN-10 cap lamp consists of a battery housing and head , connected together by means of cable.
A technologically advanced high intensity diode lamp instead of a traditional bulb providesource.
A battery housing consists of the battery and the outer cover. Depending on the version,
cap lamps differ in external covers and location transmitter. The battery consists of four tightly closed
Ni-MH 8.5Ah/1.2V cells.
Specificatio:
| |
Type of lamp
|
| Parameter |
LN-10*GLON3S |
LN-10*LOK3S |
LN-10*N |
| mass lamp |
1,5 kg |
1,5 kg |
1,4 kg |
usable lamp burning time ( time of burning )
- for diode LED 3W - full light
- light at lower intensity
|
12 h ±5%
24 h ± 5% |
min. 16 h
min. 40 h |
| location transmitter |
GLON3S |
LOK3S |
- |
| duration of location transmitter |
min 170 h |
- |
| explosion-proof construction mark |
I M2 Ex I PN-EN 62013-1
EEX ibI |
I M2 Ex I
PN-EN 62013-1 |
| reted voltage of battery |
4,8 V (4 xNi-MH 1,2V) |
| rated ampere-hour capacity of battery |
8,5 Ah |
power consumption from the battery
( average value) for main source of light-full light |
0,5 A |
| rated duration ( number of charging / discharging cycles ) |
min. 800 cyclesi |
| light source ( main & au7xiliary ) |
2 x diode LED ( 3W & 1 W ) |
| luminous intensity - main light source |
|
( according to PN-EN 62013-2 )
|
min. 100 000 h |
|
|
| overall dimensions ( l x b x h ) |
160mm x 60mm x 105mm |
| lengh of the cable |
1400 mm |
| housing protection degree |
IP 65/IP 67
( according to PN-EN 60529:2003 ) |
| overcurrent protection |
fuse WBO-1.6 A + overcurrent switch
|
| range of working temperature |
od -5°C do +40°C |
| |
|
| conformity with Standards |
PN-EN 62013-1 : 2003 (U); |
| |
PN-EN 62013-2 : 2004 (U); |
| |
PN-EN 50014 : 2002 (U); |
| |
PN-EN 50020 : 2003 (U); |
| |
PN-EN 61547:2002 |
| |
PN-EN 55015:2005 |
| |
|
| |
|
| certificate of type test WE |
KDB 04ATEX211X/1 |
It is recommended to use charging units LLD type produced by FASER S.A to charge the cap
lamps LN-10.*.....type.
|
| |
|
| |
|
back |
