CAP LAMP LN-10M * ...
LN-10M*GLON3S, LN-10M*LOK3S, LN-10M*N

Application:

The LN-10M cap lamp is an intrinsically safe lamp that can be used in underground mines where
there is a possibility of methane explosions.The cap lamp is designed for maintenance free charging,
operation is easy and gives excellent illumination in differen work situations.

  

Design:

The LN-10M cap lamp consists of a battery housing and head , connected together by means of cable.
A technologically advanced high intensity diode lamp instead of a traditional bulb providesource.
A battery housing consists of the battery and the outer cover. Depending on the version,
cap lamps differ in external covers and location transmitter. The battery consists of four tightly closed Ni-MH cells.

 

Specificatio:

 
Type of lamp
Parameter
LN-10M*GLON3S
LN-10M*LOK3S
LN-10M*N
mass lamp
1,5 kg
1,5 kg
1,4 kg
usable lamp burning time ( time of burning )
- for diode LED 3W - full light (100%)
 - for diode LED 3W (light 75% + LED diode 1W)
- for diode LED 3W (light 30%)
- for diode LED 1W
 
12 h ±5% 2300 lx
12 h ± 5% 1700 lx

24h ± 5%/min.700 lx
24h +/-5%/ min.3 lx
  
min. 16 h 2300 lx
min. 16 h. 1700 lx

min 40h/min.700 lx
min 40h/min 3 lx
location transmitter
GLON3S
LOK3S
 -
duration of location transmitter
min 170 h
-
explosion-proof construction mark
I M1 EEx ia I

reted voltage of battery
4,8 V (4 xNi-MH 1,2V)
rated ampere-hour capacity of battery
8,5 Ah
power consumption from the battery
( average value) for main source of light-full light
0,5 A
rated duration ( number of charging / discharging cycles )
min. 800 cycles
light source ( main & au7xiliary )
2 x diode LED ( 3W & 1 W )
configuration of light source
4 positions
luminous intensity - main light source
( according to PN-EN 62013-2 )
min. 100 000 h
overall dimensions ( l x b x h )
160mm x 60mm x 105mm
lengh of the cable
from 1100mm to 1600mm (standard version 1400mm)
housing protection degree
IP 65/IP 67
( according to PN-EN 60529:2003 )
overcurrent protection
fuse WBO-1.6 A + overcurrent switch
range of working temperature
od -5°C do +40°C
   
conformity with Standards
PN-EN 62013-1:2004, PN- EN 62013-2:2004
 
PN-EN 50014:2004, PN-EN 50020:2005,
 
PN-EN 50303:2004, PN- EN 61547:2002,
 
PN- EN 55015:2005, PN-EN 60529: 2003
 
certificate of type test WE
KDB 05ATEX418X/1
 
KDB 05ATEX418X/1
 

KDB 05ATEX418X/2

   
charging period
max. 10h
It is recommended to use charging units LLD type produced by FASER S.A to charge the cap
lamps LN-10.*.....type.
 

Main advantages:

  • easy operation
  • lightweight
  • over current protection
  • small
  • Ni MH battery
  • economic over long periods
  • up to 800 cycles
  • a technologically advanced high intensity diode LED ( main & auxiliary )
  • long- lasting light source life
  • maintenance free charging
  • light burning time - up to 40 h
  • superior light quality

 

back